XH-AF-20 is model of general axial flow fan, T is the fan, the number after T is 100 times the ratio between hub and the outer diameter of impeller. When the outer diameter of two impellers is equal: the larger the number(30,35,40), the hub diameter is larger, that means the blade is shorter. When the speed and power are equal, the smaller the air volume, the air pressure is bigger. These 3 model can be made with adjustable aluminum blades
XH-AF-20 is mainly for the general factory, warehouse, office, residential and other environment, ventilation or heat to enhance Heat dissipation.(The following pictures as reference)
It can also be installed in a longer exhaust pipe interval in order to improve the wind pressure in the pipeline if removing chassis.
Notes: When you want to use this series of axial fan to transport the gas that is flammable, explosive, corrosive or temperature over 80 ºC, we are designed and manufactured for you before your order.
Performance Curve&Parameter Machine NO. AF-20 series axial flow fan has 46 machine No. As this series fan have many different machine No and parameters, so if the following spes can't meet your demand,please contact our sales manager to get introduction book or catalog. Thanks for your patience!
For more differeent machine No and specification,please check other XH-AF-20 series.Please be forgiven if there is any inconveniences occurred.
Ordering instructions When ordering, please specify the axial fan number, speed, air volume, wind pressure, outlet angle and direction of rotation, as well as motor model, power, speed and so on. The most important factors are volume and pressure.
To make the proper fan selection, you must consider the following system conditions the fan will be subjected to: 1. What is the required airflow? This is rated in cubic feet of air per minute (CFM) or, in metric equivalent, it is rated in cubic meters of air per hour (M³/Hr). 2. What is the static pressure through the complete system? This is rated in static pressure water gauge (SP) or, in metric equivalent, it is rated in Pascal's (Pa).
3. What is the ambient air temperature outside the fan?
4. What will be the airflow conditions through the fan?
Clean or dirty (contaminated) air?
Dry or wet (moisture laden) air?
Temperature of air?
5. What is the altitude the fan will be operating in?
6. Will the air stream, inside the fan, contain anything that could be explosive or flammable?
7. Will the general location the fan will be operating in contain any type of explosive or flammable material or liquid?
When the exiting machine number, rotation, the wind angle and transmission mode can not meet the needs of users, we can design according to the fan similar theory and the user's specific parameters requirements.
Technical Support Service Our engineers can design the right fan for your application at a competitive price and delivery. When using our products, If any problems on installation,operation,maintainance..and so on, please contact our sale manager directly or leave a message on our website, we will call you in the first time. .
Detailed Performance Catalog Contact our sales manager to get a list of available fan sizes and to view detailed performance curves for each fan KuangFeng builds.
Company & Brand
KuangFeng fans are built by Zibo Xinhua Fan Co., Ltd. In Shandong, China. XFC has served the mining and industrial field for 24 years.
The factory was founded in 1993 and covers an area of 12, 000 square meters. Products are widely used in boilers, workshops, mines, textiles, oil, chemical, kiln, metallurgy, building materials and other industries, Our main products are mine fan, axial fan, open cotton fan, material transmission fan.
KuangFeng Fans has a wide selection of fans available, from 0.25 horsepower to 1120 horsepower and from 0.98 inch diameter to 11 inch diameter(impeller diameter). Contact us to get a list of available fan sizes and to view detailed performance curves for each fan KuangFeng builds.
KuangFeng Fan manufacture 200 series and more than 1,200 kinds of industrial fans. All include heavy-duty designs for industrial applications. We manufacture axial fans, centrifugal fans, mine fans and miniature fans. All fans below 600mm(impeller size) are direct driven. All fans above 600mm are available in both direct driven or belt driven models. All models are available with cast aluminum, steel or stainless steel propellers. All models can also be manufactured in all aluminum or all stainless steel construction.
We understand the harsh environments in which fans are used. KuangFeng fans will meet and exceed the demands of your mine or tunnel project, other industrial factory.